Jump to content

Connector:Cassette recorder: Difference between revisions

From CPCWiki - THE Amstrad CPC encyclopedia!
Nocash (talk | contribs)
Created page with 'External Cassette Connector (CPC 664/6128 only) (5 pin DIN, female) 1 Remote Control __ __ 2 Ground / - \ 3 Remote Control | |…'
 
Nocash (talk | contribs)
No edit summary
Line 1: Line 1:
== CPC Tape Connector ==
External Cassette Connector (CPC 664/6128 only) (5 pin DIN, female)
External Cassette Connector (CPC 664/6128 only) (5 pin DIN, female)
   1  Remote Control          __ __
   1  Remote Control          __ __
Line 7: Line 9:
* The two Remote Control pins are connected to a relais inside of the CPC, the relais becomes closed when the /Motor On bit in PIO Port C is set to zero, ie. the cassette recorder may use the relais to switch its power suppy on and off when Play and/or Record is pressed - this is of course supposed for low-voltages only.
* The two Remote Control pins are connected to a relais inside of the CPC, the relais becomes closed when the /Motor On bit in PIO Port C is set to zero, ie. the cassette recorder may use the relais to switch its power suppy on and off when Play and/or Record is pressed - this is of course supposed for low-voltages only.
* The CPC 6128+ does not include a Cassette Connector.
* The CPC 6128+ does not include a Cassette Connector.
== KC Compact Tape Connector ==
  1      Cas-Write            __ __
  2      GND                /  -  \
  3      Cas-Read          |      |
  4      Sound-Mono        |3    1|
  5      Motor On (TTL)      \5_2_4/
  Shield GND
* Caution: The connector looks same as on CPC, but the Pin-Outs are entirely different, and, Motor On is a TTL output (instead of a Relais)

Revision as of 05:43, 29 January 2010

CPC Tape Connector

External Cassette Connector (CPC 664/6128 only) (5 pin DIN, female)

 1  Remote Control           __ __
 2  Ground                  /  -  \
 3  Remote Control         |       |
 4  Data Input             |3     1|
 5  Data Output             \5_2_4/
  • The two Remote Control pins are connected to a relais inside of the CPC, the relais becomes closed when the /Motor On bit in PIO Port C is set to zero, ie. the cassette recorder may use the relais to switch its power suppy on and off when Play and/or Record is pressed - this is of course supposed for low-voltages only.
  • The CPC 6128+ does not include a Cassette Connector.

KC Compact Tape Connector

 1      Cas-Write            __ __
 2      GND                 /  -  \
 3      Cas-Read           |       |
 4      Sound-Mono         |3     1|
 5      Motor On (TTL)      \5_2_4/
 Shield GND
  • Caution: The connector looks same as on CPC, but the Pin-Outs are entirely different, and, Motor On is a TTL output (instead of a Relais)