Connector:Printer port: Difference between revisions
| Line 110: | Line 110: | ||
|} | |} | ||
CPC+ and [[KC Compact]] printer ports differ on Pin 16,17. Also, Pin 9 is controlled differently on software side (see [[8bit Printer Ports]]). And, Pin 1-8 are bi-directional on the KC Compact. | CPC+ and [[KC Compact]] printer ports differ on Pin 16,17. Also, Pin 9 is controlled differently on software side (see [[8bit Printer Ports]]). And, Pin 1-8 are bi-directional on the KC Compact. | ||
== Aleste Printer Port == | |||
The [[Aleste 520EX]] uses two 7pin DIN female connectors: | |||
Pin X5.B X5.A X5.B X5.A | |||
1 D4 D0 __ __ __ __ | |||
2 COMMON GND / - \ / - \ | |||
3 D7 D3 |(7) (6)| |7 6| | |||
4 D5 D1 |3 1| |3 1| | |||
5 D6 D2 \5_2_4/ \5_2_4/ | |||
6 ? STROBE | |||
7 ? BUSY | |||
Shield GND GND | |||
According to the schematics, X5.B is only 5pin. But according to component | |||
map and all existing photos, both connectors are 7pin. The two extra pins are | |||
possibly unused. COMMON is /Joystick1 select, there is no purpose specified | |||
for it being on the printer port. | |||
[[Category:Hardware]][[Category:CPC Internal Components]] | [[Category:Hardware]][[Category:CPC Internal Components]] | ||
Revision as of 10:44, 11 February 2010
Classic CPC Pinout
Error creating thumbnail: Unable to save thumbnail to destination
| Pin No. | CPC | PC / Centronics |
| 1 | /Strobe | /Strobe |
| 2 | Data 0 | Data 0 |
| 3 | Data 1 | Data 1 |
| 4 | Data 2 | Data 2 |
| 5 | Data 3 | Data 3 |
| 6 | Data 4 | Data 4 |
| 7 | Data 5 | Data 5 |
| 8 | Data 6 | Data 6 |
| 9 | GND | Data 7 |
| 10 | NC | /Ack |
| 11 | Busy | Busy |
| 12 | NC | PaperEnd |
| 13 | NC | SLCT |
| 14 | GND | /AutoLF |
| 15 | NC | |
| 16 | GND | |
| 17 | NC | |
| (18) | NC | |
| 19..26 | GND | GND |
| 27 | NC | GND |
| 28 | GND | GND |
| 29..30 | NC | GND |
| 31 | NC | /Init |
| 32 | NC | /Error |
| 33 | GND | |
| 34 | NC | |
| 35 | NC | |
| (36) | NC | /Select |
- Note: Despite of using a 34pin edge connector, Amstrad used a 36pin Centronics-style pin numbering. Pin 18 and Pin 36 do not exist on the 34pin edge connector.
- As shown above Pin9 is wired to GND (instead of Data 7), for upgrading, see 8bit Printer Ports.
CPC Plus and KC Compact Pinout
Error creating thumbnail: Unable to save thumbnail to destination
| Pin No. | CPC+ | KC Compact | PC |
| 1 | /Strobe | /Strobe | /Strobe |
| 2 | Data 0 | Data 0 | Data 0 |
| 3 | Data 1 | Data 1 | Data 1 |
| 4 | Data 2 | Data 2 | Data 2 |
| 5 | Data 3 | Data 3 | Data 3 |
| 6 | Data 4 | Data 4 | Data 4 |
| 7 | Data 5 | Data 5 | Data 5 |
| 8 | Data 6 | Data 6 | Data 6 |
| 9 | Data 7 (CRTC) | Data 7 (PIO) | Data 7 |
| 10 | NC | NC | /Ack |
| 11 | Busy | Busy | Busy |
| 12 | NC | NC | PaperEnd |
| 13 | NC | NC | SLCT |
| 14 | NC | NC | /AutoLF |
| 15 | NC | NC | /Error |
| 16 | +5V | NC | /Init |
| 17 | GND | NC | /Select |
| 18-25 | GND | GND | GND |
CPC+ and KC Compact printer ports differ on Pin 16,17. Also, Pin 9 is controlled differently on software side (see 8bit Printer Ports). And, Pin 1-8 are bi-directional on the KC Compact.
Aleste Printer Port
The Aleste 520EX uses two 7pin DIN female connectors:
Pin X5.B X5.A X5.B X5.A 1 D4 D0 __ __ __ __ 2 COMMON GND / - \ / - \ 3 D7 D3 |(7) (6)| |7 6| 4 D5 D1 |3 1| |3 1| 5 D6 D2 \5_2_4/ \5_2_4/ 6 ? STROBE 7 ? BUSY Shield GND GND
According to the schematics, X5.B is only 5pin. But according to component map and all existing photos, both connectors are 7pin. The two extra pins are possibly unused. COMMON is /Joystick1 select, there is no purpose specified for it being on the printer port.