Jump to content

AMSDAP: Difference between revisions

From CPCWiki - THE Amstrad CPC encyclopedia!
Phi2x (talk | contribs)
Phi2x (talk | contribs)
Line 22: Line 22:
[[SymbOS]] makes use of:
[[SymbOS]] makes use of:
*the graphics cards based on the Yamaha V9990 graphics chip [[Media:Yamaha v9990 datasheet.pdf|V9990 Datasheet]] [[Media:Yamaha v9990.pdf|V9990 Application Manual]]
*the graphics cards based on the Yamaha V9990 graphics chip [[Media:Yamaha v9990 datasheet.pdf|V9990 Datasheet]] [[Media:Yamaha v9990.pdf|V9990 Application Manual]]
*the soundcards based on the Yamaha OPL4 sound chip [[Media:Yamaha opl4 datasheet.pdf|OPL4 Datasheet]] [[Media:Yamaha opl4.pdf|OPL4 Application Manual]]. You can think of the OPL4 chip as an OPL3 and a Gravis Ultrasound ducktaped together
*the soundcards based on the Yamaha OPL4 sound chip [[Media:Yamaha opl4 datasheet.pdf|OPL4 Datasheet]] [[Media:Yamaha opl4.pdf|OPL4 Application Manual]] [[Media:Yrw801.pdf|YRW801 General MIDI Datasheet]]. You can think of the OPL4 chip as an OPL3 and a Gravis Ultrasound ducktaped together
*the MP3 hardware player soundcards
*the MP3 hardware player soundcards



Revision as of 14:43, 21 October 2024

AMSDAP - CPC and MSX expansion slots for Amstrad CPC

Error creating thumbnail: Unable to save thumbnail to destination

Error creating thumbnail: Unable to save thumbnail to destination

The AMSDAP is developed in collaboration by Prodatron and TMTLOGIC.

With this board, it is possible to use MSX hardware on the CPC computer. This only applies to hardware that uses the IO bus of the Z80. Hardware that uses memory functions is not supported.

On the board is a DC / DC converter that provides the +/- 12v of the MSX. The maximum current is 84mA.


Technical information

The address range of the MSX can be found at &FFxx


MSX hardware supported

SymbOS makes use of: