Schneiderware Basisplatine: Difference between revisions
Created page with "The Schneiderware series consists of several DIY projects which have been released in german magazine CPC Schneider International published by DMV. The name "Schneide..." |
No edit summary |
||
| Line 1: | Line 1: | ||
The [[Schneiderware]] | The [[Schneiderware Basisplatine]] (backplane) is some kind of a [[ECB-Bus]] motherboard for the [[Schneiderware]] DIY series, which was published by german magazine [[CPC Schneider International]]. The board has five 64-pin ECB sockets (for use with the DIY boards of the series), a 50-pin connector (for the CPC expansion port), and 7 soldering points (for an optional power supply, like the [[Schneiderware Power Supply]]). | ||
The | The plain PCB, or the fully assembled board were available via mail-order. Unlike as for the other DIY projects of the Schneiderware series, the PCB layout has not been printed (in paper-form) in the magazine (though the magazine offered to send them to interested persons). Another solution would have been to buy a standard ECB backplane (like [[:File:Reichelt Euro-Bus-Karte.jpg|this]]), and to build an adaptor for the CPC expansion port by hand. | ||
* [[Schneiderware Basisplatine|Schneiderware #2a Basisplatine (Motherboard)]] (7/1986 pages 60-67) | * [[Schneiderware Basisplatine|Schneiderware #2a Basisplatine (Motherboard)]] (7/1986 pages 60-67) | ||
Revision as of 19:52, 30 September 2010
The Schneiderware Basisplatine (backplane) is some kind of a ECB-Bus motherboard for the Schneiderware DIY series, which was published by german magazine CPC Schneider International. The board has five 64-pin ECB sockets (for use with the DIY boards of the series), a 50-pin connector (for the CPC expansion port), and 7 soldering points (for an optional power supply, like the Schneiderware Power Supply).
The plain PCB, or the fully assembled board were available via mail-order. Unlike as for the other DIY projects of the Schneiderware series, the PCB layout has not been printed (in paper-form) in the magazine (though the magazine offered to send them to interested persons). Another solution would have been to buy a standard ECB backplane (like this), and to build an adaptor for the CPC expansion port by hand.
- Schneiderware #2a Basisplatine (Motherboard) (7/1986 pages 60-67)
Pictures
-
Motherboard Pin-Outs
-
Basisplatine (component side)
-
Basisplatine (solder side)
.jpg){kind=link}
.jpg){kind=link}