Octoate: Difference between revisions
m →Hardware projects: - argh... not BBCode!!! too late to edit in the Wiki ;-) |
m →Hardware projects: added articles |
||
| Line 2: | Line 2: | ||
'''Octoate''' bought his Schneider CPC in 1985 and joined the scene very late (ca. 1998). He is mostly working on hardware extensions and started the [[CPC-IDE]] project, which was the predecessor of the [[SYMBiFACE II]], in autumn 2004 together with [[Dr.Zed]] (he developed the hardware) [[Tolkin]] and [[TFM]]. Most of his soft- and hardware projects were only made for his own usage and never reached the public. | '''Octoate''' bought his Schneider CPC in 1985 and joined the scene very late (ca. 1998). He is mostly working on hardware extensions and started the [[CPC-IDE]] project, which was the predecessor of the [[SYMBiFACE II]], in autumn 2004 together with [[Dr.Zed]] (he developed the hardware) [[Tolkin]] and [[TFM]]. Most of his soft- and hardware projects were only made for his own usage and never reached the public. | ||
== Articles == | |||
* [http://www.octoate.de/wp/articles/german/laufwerksriemen-wechseln/ Changing the floppy disk drive belt (German)] | |||
* [http://www.octoate.de/wp/articles/connect-cpc-to-vga-display/ Connecting a CPC to a VGA display] | |||
* [http://www.octoate.de/wp/articles/german/entwickeln-mit-z88dk/ Development with Z88dk (German)] | |||
== Hardware projects == | == Hardware projects == | ||
Revision as of 14:10, 19 November 2011
Octoate bought his Schneider CPC in 1985 and joined the scene very late (ca. 1998). He is mostly working on hardware extensions and started the CPC-IDE project, which was the predecessor of the SYMBiFACE II, in autumn 2004 together with Dr.Zed (he developed the hardware) Tolkin and TFM. Most of his soft- and hardware projects were only made for his own usage and never reached the public.
Articles
- Changing the floppy disk drive belt (German)
- Connecting a CPC to a VGA display
- Development with Z88dk (German)
Hardware projects
- 4-color scanner for a printer (similar to the Dart Scanner)
- 7-bit relais card
- CPC-IDE Interface (financial support and beside the one by Dr.Zed some different prototypes using 8255, CPLD and CPC Booster with Vinculum)
- Flash-ROM-Box (only one prototype, used the Atmel AT90F040 flash rom)
- Flash-ROM-Cartridge for the CPC Plus
- GMX Mouse to CPC Joystick port adapter
- ROM-Box (small interface for only one ROM)
- VHDL implementation of the ACID protection chip (released here)
Software
- Disc Image Copy (DIC - transfered whole disks over the printer port to a PC)
- Plotter driver for the relais card (controlled a self-made plotter)
- CPC Booster RS232 driver for Z88DK